+1 801.798.5425 info@precorp.net

Custom Cutting Tools

CUSTOM_white

Precorp Offers Diverse Carbide, Coated Carbide and PCD Solutions

Precorp offers PCD, Solid Carbide and Coated Carbide engineered cutting tool solutions. Competency in these material areas makes Precorp a total solutions provider. This allows Precorp to supply the best cutting tool material for any application.

CASE STUDY
PCD Veined Drill for automated drilling of CFRP stacked with Titanium

1. Two flute PCD veined drill.

2. Coolant through.

3. Excellent hole quality with regard to size, surface finish and exit burr.

4. All specifications and dimensions are custom per customer’s requirements.

5. Re-grind capable resulting in lower cost per hole.

 

Precorp 86 series drill.

CASE STUDY
Port Tools

1. Available in PCD, Solid Carbide and Coated Carbide.

2. Available in multiple shank configurations.

3. Precision manufacturing guarantees excellent hole quality.

4. All specifications and dimensions are custom per customer’s requirements.

5. Re-grind capable resulting in lower cost per hole.

 

PCD Tipped Integral Shank Reamer.

THE POLYCRYSTALLINE DIAMOND (PCD) PROCESS

PRECORP’s PCD process is the method for making unique shaped diamond edges which enables the creation of innovative diamond tooling solutions for common and special problems.

STEP 1
A carbide blank is slotted and filled with diamond powder.

STEP 2
The carbide blank is inserted into one of Precorp’s high pressure, high temperature presses and subjected to 2,700º F and 876,000 psi. In this process the diamond powder is compressed and the diamond crystals are bonded to each other and to the carbide blank.

STEP 3
The PCD nib is then brazed to a solid carbide shank. The braze is located sufficiently away from the tip of the tool to avoid any potential thermal damage. This allows the use of a high temperature high strength braze joint between the nib and the carbide shank.

STEP 4
The drill geometry is ground to produce the finished PCD tool. This patented process allows for many tool geometries that are impractical and/or impossible using conventional PCD insert processes

IF YOU HAVE A HOLE GENERATION PROCESS OR A FUTURE PROJECT, TAKE ADVANTAGE OF PRECORP’S EXPERTISE AND HISTORY. WE WILL CUSTOMIZE A SOLUTION THAT WILL GUARANTEE THE RESULTS YOU ARE LOOKING FOR.